Both papers · free lessons

Vectors for the TMUA

Use 2D vectors for translations and geometry. Add, subtract and scale vectors.

Paper
Both papers
Lessons free
2 of 5
Free lesson time
19 min
All lessons
73 min

In the released papers: 0 of 320 questions.

What the specification says

Vectors on the TMUA

Read the full specification(PDF from UAT-UK, opens in a new tab)
  • Represent translations and displacements as column or diagrammatic vectors.

  • Add and subtract vectors and multiply by a scalar.

  • Use vector paths, parallel directions and ratios to establish geometric relationships.

  • Use only the vector operations listed in the current TMUA specification.

Lesson 1 · 8 min

Read vectors as displacements

A vector records a change in position; its starting point is irrelevant to its value.

The idea

A vector records displacement, so addition joins paths head-to-tail and subtraction compares endpoints. Equal vectors need the same magnitude and direction but not the same location.

Column and geometric forms are two representations of the same object. Scalar multiplication changes length and possibly reverses direction without changing the supporting line.

When to use it

Choose a consistent path between named points and write endpoint minus start point before simplifying components.

Main steps

  1. 1

    Add vectors component by component or place their arrows head to tail.

  2. 2

    Subtracting a vector adds its reverse: a−b=a+(−b)\mathbf{a}-\mathbf{b}=\mathbf{a}+(-\mathbf{b}).

  3. 3

    A scalar changes magnitude and may reverse direction when negative.

Worked example

Let a=(3−1)\mathbf{a}=\begin{pmatrix}3\\-1\end{pmatrix} and b=(−24)\mathbf{b}=\begin{pmatrix}-2\\4\end{pmatrix}. Find 2a−b2\mathbf{a}-\mathbf{b}.

Try it first, then show the solution
  1. 1

    2a=(6−2)2\mathbf{a}=\begin{pmatrix}6\\-2\end{pmatrix}.

  2. 2

    Subtract b\mathbf{b} component by component.

  3. 3

    (6−(−2)−2−4)\begin{pmatrix}6-(-2)\\-2-4\end{pmatrix}.

Answer

(8−6)\begin{pmatrix}8\\-6\end{pmatrix}.

Lesson check

Try this without looking back at the example.

If v=(2−3)\mathbf{v}=\begin{pmatrix}2\\-3\end{pmatrix}, what is −2v-2\mathbf{v}?

Answer options

Save your progress and track this lesson's check with a free account.

Create a free account

Lesson 2 · 11 min

Prove geometry with paths and ratios

Choose a small set of base vectors, express points consistently and compare scalar multiples.

The idea

Vector geometry replaces a diagram with linear combinations of independent directions. Midpoints, ratios and collinearity become coefficient statements.

To prove two lines meet, describe the same point from both lines and equate coefficients. Parameters between 00 and 11 confirm the point lies inside the relevant segment.

When to use it

Assign two non-parallel base vectors, express every constructed point through them, then compare coefficients rather than lengths.

Main steps

  1. 1

    For any route from AA to CC, AC→=AB→+BC→\overrightarrow{AC}=\overrightarrow{AB}+\overrightarrow{BC}.

  2. 2

    Vectors that are non-zero scalar multiples are parallel; a negative multiple reverses direction.

  3. 3

    A midpoint MM of ABAB satisfies OM→=12(OA→+OB→)\overrightarrow{OM}=\frac{1}{2}(\overrightarrow{OA}+\overrightarrow{OB}).

Worked example

Points AA and BB have position vectors a\mathbf{a} and b\mathbf{b}. Find the position vector of the point PP two-thirds of the way from AA to BB.

Try it first, then show the solution
  1. 1

    AB→=b−a\overrightarrow{AB}=\mathbf{b}-\mathbf{a}.

  2. 2

    AP→=23(b−a)\overrightarrow{AP}=\frac{2}{3}(\mathbf{b}-\mathbf{a}).

  3. 3

    OP→=a+AP→\overrightarrow{OP}=\mathbf{a}+\overrightarrow{AP}.

Answer

OP→=13a+23b\overrightarrow{OP}=\frac{1}{3}\mathbf{a}+\frac{2}{3}\mathbf{b}.

Lesson check

Try this without looking back at the example.

The midpoint of points with position vectors p\mathbf{p} and q\mathbf{q} has position vector

Answer options

Save your progress and track this lesson's check with a free account.

Create a free account

Included with premium

3 more vectors lessons

These go further, up to difficulty 4–5 question types, and connect to matched practice from the question bank.

  • Prove an intersection with coefficients

    Hard vector geometry is usually a coefficient problem: describe one point along two different lines and force the descriptions to agree.

    15 minDifficulty 4–5Premium

  • Intersect unequal cevians by coefficient matching

    Translate two different side ratios into point vectors, parameterise both cevians, and solve their intersection without introducing lengths or angles.

    20 minDifficulty 4–5Premium

  • External intersections and directed ratios

    Allow line parameters outside [0,1][0,1], locate intersections on side extensions, and use affine coefficient sums to test collinearity.

    19 minDifficulty 4–5Premium

Your next step

Practise vectors under exam conditions

Free, no account needed

Take the timed diagnostic

20 Forge-original questions under exam timing, calibrated to the 2023 paper's difficulty profile. You get a score and a topic-by-topic breakdown at the end.

Start the free diagnostic

Free account

Save your progress

Create a free account for 41 free lessons and 4 methods in Learn, with progress kept on this device, and free sittings of released past papers.

Create a free account

Premium

Practise at the harder level

561 Forge originals calibrated for the harder computer-based papers sat since 2024, with worked solutions, unlimited mocks, all 104 lessons and 18 methods.

£49 for 12 months or £20 for 30 days. One payment, no automatic renewal.

See premium